Battery internal resistance tester host cleaning maintenance
Use a soft wet cloth and mild cleaning agent to clean the battery internal resistance tester host. Please do not use scratch type, dissolve type cleaning agent or alcohol, etc., so as not to damage the text on the host.
Voltage test clamp cleaning and maintenance
Clean the electrical clamp with a soft damp cloth and mild detergent. After cleaning, wash again with clean water and wipe dry. Please do not abrade the metal part of the probe, so as not to cause poor contact and make the test results error.
Clean and maintain current test probe
Clean the current probe periodically with a soft damp cloth and mild detergent. Please do not use abrade, dissolving detergent or alcohol. Open the clamp and test the core head with a slightly oiled cloth. Do not allow the core head to rust or corrode.
After use, put the host into the chassis in time. All probes and wires should be arranged and put into the corresponding position in the chassis. There is no need to remove the battery, even if it is stored for a long time. The battery, however, gradually discharges. To keep the battery in good condition, it is recommended to charge the battery regularly (once a month).
Batteries may not be charged on delivery and should be charged before use. When the charger indicator is red, it means it is charging, and when it is green, it means the battery is fully charged. When fully charged, the battery usually lasts five to six hours. When charging, connect the charger and the host, charging without turning on the machine.
Wuhan Xinshengneng battery tester manufacturers, good product quality, complete functions, stable performance, guaranteed service, welcome users to call 0312-3188565 consultation!
