High voltage switch dynamic characteristics tester three kinds of closing brake control
High voltage switch dynamic characteristics tester three test perfect realization
(1) Conventional test, to measure the switch opening and closing time, bounce time, the same time; To measure the speed data of the switch, such as the rigid separation speed, maximum speed, average speed, opening distance and overrange;
(2) Reclosing test to measure the time data of switch reclosing:
(3) low voltage test, to measure the voltage action value of the split coil, power supply voltage can be adjusted continuously;
Three kinds of closing and opening brake control
(1) Support internal synchronous control, internal power output DC voltage to close, break coil;
(2) Support external synchronous control, external power supply to provide voltage to close, break coil;
(3) Support the synchronous control of empty nodes. The power supply of the switch itself provides voltage to close and break the coil, and two passive empty contacts are provided internally.
High voltage switch dynamic characteristics tester with wave recording function
The corresponding time coordinates can display the time curve of fracture state, travel time (S-T) curve and coil current time (I-T) curve, which is conducive to the accurate judgment of the fault of the switching mechanism.
High voltage switch dynamic characteristic tester large capacity memory, support U disk built-in or external
A USB flash drive with a capacity of 4G can store massive on-site data. The USB flash drive can be either built-in or external. High voltage switch dynamic characteristics tester has a standard USB interface, easy to export test data; Usb flash drive is used to insert USB flash drive in external mode. Usb flash drive is used to connect PC directly in internal mode.
Measure the speed and current of 6 channels of fracture
Can test 6 fracture data, the internal anti-interference circuit can resist the field induction of 10kV high voltage; Can test 1 speed, equipped with linear sensor, angular velocity and other sensors, almost covering all types of switch test internal synchronization mode, can test 1 through the closing, opening coil current:
High voltage switch dynamic characteristics tester equipped with PC layer software
PC software can not only control the instrument remotely, export the test data, but also manage and analyze the test data, generate test reports, export EXCEL data, etc.
High voltage switch dynamic characteristic tester built-in anti-interference circuit
The internal anti-interference circuit can meet the reliable use of 500kV substation, the protection circuit can ensure the safety of instrument and personnel, instrument and stability, accurate test;
Wuhan Xinshengneng Technology Co., Ltd. is a professional manufacturer of electric power testing equipment, producing high voltage testing equipment with complete models, powerful functions, stable performance and wide range of use. It is favored by many electric power workers. Welcome to inquire 0312-3188565.
