In your daily work, if you want to test the transformation ratio group of power transformers, you need to use a transformer transformation ratio group tester. The main function of this equipment is to test the transformation ratio and phase difference of the transformer and to The measurement of phase-shifted rectifier transformers is widely used in the power industry and is very popular. So how to choose a transformer ratio group tester? This article will give you a brief introduction.
Transformer ratio testers are divided into ordinary and special types. The test objects of the two types of ratio testers are different. The test objects of the ordinary type are ordinary power transformers, and the test objects of the special type are When choosing special transformers, you need to choose according to your actual situation. At the same time, there are many businesses that produce and sell this clock equipment on the market. The quality of the products is good or bad. When you choose, you need to polish it. Eyes, this article will briefly introduce the features of these two devices.
Using the bridge to measure the ratio of the transformer, due to the complicated operation process and the narrow measuring range, it brings difficulties to the measurement. For this reason, our company adopts modern electronic technology to develop a new generation of ytc3317 transformation ratio tester. It has the advantages of small size, light weight, high precision and good stability. It uses large-screen Chinese character display, menu operation, and friendly interface. The ratio group can be measured at once. This instrument is a testing instrument for the power industry. According to the International Electrotechnical Commission (iec) and related national standards, the transformation ratio test is an indispensable item in the process of power transformer production, user handover and overhaul testing. It can effectively monitor the quality of transformer products during production and use, and prevent transformers Turn-to-turn short circuit, open circuit, wiring error, internal failure of voltage switch or contact failure. Therefore, the automatic ratio tester developed by our company is easy to operate, has complete functions, stable and reliable data, and greatly improves the test speed. The utility model can meet the requirements of various large, medium and small transformers for transformation ratio tests.
The instrument can use large-screen true color LCD as the display, full Chinese graphics for operating system interface and equipped with Chinese character research to prompt student information, multi-parameter LCD display user interface, friendly man-machine dialogue interface design, vector graphics display and wiring The judgment is to check the correctness of the control circuit and provide a reliable basis. Full-touch conductive silica gel keyboard operation learning mode, the operation feels good, simple and easy to use. The instrument has a built-in large-capacity program memory that does not lose related data when power off. It can save and record the construction site verification data resources. It can expand the network to store up to 1000 sets of on-site verification calculation results. It can provide back-end microcomputer technology management accounting software. The results are transferred to the computer by the disk, and the production enterprise reports and prints, realizing computerized management.
Transformer ratio group tester is a high-voltage power test equipment that you often need to use. When you choose, you need to choose according to your actual situation. When using it, you must first read the product manual and strictly follow The instructions are required to carry out the test.
