Different insulation pressure test equipment has different use characteristics, the following to understand the characteristics of transformer winding deformation tester and Wuhan Xinshengneng Technology Co., LTD.
1, transformer winding deformation tester is composed of measuring part and analysis software part, the measuring part is controlled by high-speed microcontroller, composed of signal generation and signal measurement. The measuring part is connected with tablet computer by WIFI interface, without wiring, easy to use, and can also be connected with tablet computer or laptop computer by USB interface.
2, in the test process only need to remove the transformer connection bus, do not need to the transformer hanging cover, disassembly to complete all the tests.
3, the instrument has a variety of frequency linear sweep measurement system measurement function, linear sweep measurement scan frequency up to 10MHz, frequency scan interval can be divided into 0.25khz, 0.5khz and 1kHz, to provide more analysis of transformer deformation.
4, the instrument has high degree of intelligence, easy to use, with automatic range adjustment, automatic sampling frequency adjustment and other functions.
5, software using the Windows platform, compatible with windows98/2000 / winXP/Windows 7 system. It provides a more convenient and easy-to-use display interface for users.
6, provide comparative analysis of historical curves, can load multiple historical curve observation, can specifically choose any curve for transverse and longitudinal analysis. Equipped with expert intelligent analysis and diagnosis system, it can automatically diagnose the state of transformer winding, load 6 curves at the same time, and automatically calculate the relevant parameters of each curve, automatically diagnose the deformation of the winding, and give the reference conclusion of diagnosis.
7, the software management function is powerful, fully consider the needs of field use, automatically save environmental conditions parameters, in order to provide a basis for transformer winding deformation diagnosis. Automatic storage of measurement data, with color printing function, convenient user out of the test report.
8, the humanization characteristics of the software is obvious, the measurement of various conditions for the selection, transformer detailed parameters can be saved for diagnostic reference, and do not have to input in the field, you can add modified information later, it is more convenient to use.
9. The software has a high degree of intelligence. After the input and output signals are connected and the condition parameters are set, all the measurement work can be completed, and the historical waveform curve can be opened for comparison and observation and stop measurement at any time in the measurement.
10, each phase measurement time is less than 60 seconds, a high, medium and low winding power transformer (no capacity, voltage level) winding deformation measurement, the total time is not more than 10 minutes.
11. When measuring the transformer, the wiring personnel can arbitrarily lay the signal input and output leads, which has no effect on the measurement results. The wiring personnel can stay on the transformer tank, without coming down, and reduce the labor intensity.
Wuhan Xinshengneng Technology Co., Ltd. specializes in the production of transformer test series of test equipment, the production of many kinds of products, complete models, stable performance, cost-effective products, welcome to call 0312-3188565 consultation!
