● Product overview
Product name: XSN-YSP-01 insulating oil chromatography tester
Product specification: XSN-YSP-01
Product introduction: XSN - YSP - 01 my company launched a is suitable for the analysis of transformer oil chromatography, the instrument adopts the classic three detector processes, a sample of seven kinds of gas dissolved in insulating oil can be completed through full analysis of the component content (including H2, CH4, C2H4, C2H6, C2H2, CO and CO2, if necessary can increase the detection of O2 and N2).
Product features:
1, Using a new industrial design, the current mainstream network communication technology applied to the gas chromatograph, developed a new gas chromatograph.The instrument adopts the new high-integration industrial chip, bus technology, micro-flow gas control technology and data processing software to optimize the temperature control precision and gas control precision, which fundamentally improves the reliability of the instrument;
2, The instrument has the function of analysis condition parameter storage, including six temperature control set value, over-temperature protection value and other analysis parameters can be stored;
3. The instrument has a built-in 24-bit high-resolution and high-stability data acquisition system. The instrument configuration network port can be directly connected with the industrial computer, which can realize the reverse control of the chromatograph by the workstation. The various parameters of the instrument can be set through the workstation, and the storage and call of various analysis methods can be realized, and data analysis can be completed. Make chromatograph and workstation realize bidirectional transmission, truly realize the integration of control analysis data processing;
4, The instrument adopts modular structure design, easy to replace and upgrade;
5. The instrument adopts multi-processor parallel working mode, which makes the instrument more stable and reliable;
6, The instrument has precise control valve parts and flow system, with high reproducibility and stability;
7, the instrument can be installed at the same time a thermal conductivity detector (TCD) and two hydrogen flame ionization detector (FID). The unit design has the characteristics of high sensitivity, low noise and wide linearity, and can be combined flexibly.
Product name: oil chromatographic analyzer, automatic oil chromatographic analyzer, automatic oil chromatographic analyzer, chromatograph.
Test subjects:
Applicable to petrochemical, biochemistry, medicine and health, health quarantine, food inspection, environmental protection, food industry, medical and clinical departments. In these fields, gas chromatography has solved the problems of industrial intermediates and industrial products quality inspection, scientific research, pollution detection, production control and so on.
● Technical parameters
1. MIN concentration (unit L/L) :(see the table on the right)
2. Qualitative repeatability: deviation ≤ 1%
3. Quantitative repeatability: deviation ≤ 3%
4, detector technical indicators: thermal conductivity detector (TCD)
The semi-diffuse structure is adopted
The power supply adopts constant current control mode
③ Sensitivity: ≥10000mV·ml/mg (benzene/toluene)
④ Baseline noise: ≤20μV
⑤ Baseline drift: ≤100μV/30min
⑥ Linear: ≥105
5, detector technical indicators: hydrogen flame ionization detector (FID)
① Cylinder collector structure design, high response
② higher than 130℃ program automatic ignition; Stabilization time: 10 minutes
③ Detection limit: ≤3×10-12g/s (n-hexadecane/isooctane)
④ Baseline noise: ≤5×10-14A
⑤ Baseline drift: ≤2×10-12A/30min
⑥ Linear: ≥107
6, at room temperature 4℃~450℃ accuracy ±0.1℃
