XSN-JF-05 partial discharge inspection instrument adopts modern electronic and computer integrated technology to realize signal amplification, filtering, data acquisition, data processing, partial discharge parameter calculation, graph drawing, automatic generation of test report, so as to complete the intelligent measurement and analysis of partial discharge. The device adopts hand-held design and Wince system development. The equipment is light, easy to carry, fast measurement, easy to use in the field; Friendly interface, simple operation, high refresh rate; Perfect function, strong anti-interference ability, accurate measurement. The instrument does not damage the power equipment and has no impact on the operation of the equipment. According to the spectrum obtained by various testing modes of UHF and US methods, the insulation defects or hidden dangers of testing power equipment can be diagnosed and analyzed, so as to clearly judge the running state of the power equipment.
Product name:
partial discharge detector, ultrasonic partial discharge detector, partial discharge tester, local discharge detector, local discharge detector.
Test subjects:
The ultrasonic signal is received to judge the existence and position of partial discharge.
Host parameters:
1. Number of detectable channels: 2 channels, 1 UHF channel, 1 US channel
2. Sampling accuracy: 12bit
3, synchronization mode: internal synchronization, external synchronization, optical synchronization
UHF parameters:
1. Detection bandwidth: 300MhZ-1.5ghz
2. Output mode: SMA head output
3. Receiving mode: antenna receiving
4. Transmission mode: coaxial cable
5, detection sensitivity: < -60dbm
US parameters:
1. Frequency band: 20-120khz
2, gain: 40dB±1dB
3, peak sensitivity: >70dB
4. Mean sensitivity: >50dB
5, dynamic range: >80dB
Hardware parameters:
1, display: 4.3 "TFT true color LCD screen
2, resolution: 480×272
3, operation: film button
4, storage: SD card standard 4G card, the maximum support 32G
5，Interface: 3.5mm stereo headphone jack
Input port for DC-005 low voltage DC charger
Charging LED indicator light
RS232 debug port
Profile synchronous mouth
usb2.0
internet access
SD card slot
6, the power supply
Internal power supply: Battery powered (16.8V lithium battery)
Normal working time: about 7 hours, full time about 3 hours
7, size: 235mm×133mm×48mm
8, weight: 0.85kg
9, the use of ambient temperature: -20℃ to 50℃
10, storage environment temperature: -40℃ ~ 70℃
11, humidity: 10%-90% (non-condensing)
12, altitude: ≤3000m
