■ Functional features
▲ Simple operation. Use the special operating rod to clamp the upper jaw of the wiring pliers on the position to be connected, and push and pull the special operating rod to make the jaw open and close freely to complete the wiring work. The opening size of the wiring clamp is large (80mm), and it is equipped with a guide mechanism, so it is very convenient to hang the card.
▲ Clamping force. The principle of saving force by moving pulley is used between the upper and lower jaws of the wire clamp, so the larger clamping force can be obtained by using smaller pulling force.
▲ Inside the clamp clamp locking and releasing device. When the special lever is pulled, the elastic energy storage device in the clamp can automatically lock the jaw at any required strength. If the special lever is not pushed, the self-locking device will never open by itself, with reliable performance. When pushing the special lever, the release device in the clamp can open the clamp mouth, and the operation is very convenient.
▲ Good contact. Clamp part with steel needle, wire clamp clamp in clamping at the same time has the function of overcoming the oxide film, to ensure good contact between the clamp and wiring position.
▲ Short current is greater than 100A.
▲ Practical. The Angle of the pliers head can be changed to complete the grounding test or maintenance at different angles, thicknesses, diameters, and heights of less than 8 meters.
▲ Small weight, light to use. Reasonable structure design, excellent texture, durable, clamp head weight 650 grams.
■ Technical parameters
▲ Specification: 8 meters
▲ Box size: 152cm×27cm×11cm
▲ Clamp head weight: ≤ 650 grams /
▲ Clamp opening size: 70mm
▲ Short current: > 100A
